toile de cuisson pâtissière 003222

Baking paper is the most discreet consumable in a bakery, and one of the most expensive over a year. Every sheet goes in the bin after a single batch, yet it still has to be cut, stored, handled and reordered. Many artisans and production managers therefore start looking for a baking paper alternative that will not compromise the bake or the consistency of their products.

Three reusable solutions exist. They are not equivalent and they do not suit the same productions. This guide compares the silicone-coated fibreglass baking cloth, the PTFE sheet and the mould that removes the need for any support at all.

Why look for a baking paper alternative in production?

In a home kitchen, baking paper causes no trouble at all. As soon as you move into production, the logic changes completely. Every batch uses a sheet, sometimes two, and that consumable reappears on every supplier order, every delivery and every stock count.

Three costs weigh more than the purchase price itself. First, the time spent cutting and positioning sheets, multiplied by the number of trays and batches each day. Second, storage, because a roll or a ream takes up permanent space in a kitchen where every square metre counts. Third, waste, which fills the bins and adds to your collection bill.

Baking paper slips and creases

One technical point comes up constantly on the shop floor. A light sheet lifts in a fan oven, creases under a wet dough and leaves marks on the finished product. On a pastry or a macaron shell, that defect shows immediately. A rigid cloth held down by its own weight removes the problem, which explains a good share of the switches we see.

Key takeaway. Replacing baking paper is not decided on the price of the roll alone. The real calculation includes handling time, storage space, product consistency and the volume of waste generated.

The three reusable alternatives to baking paper

The market offers three families of solutions. They answer different needs, and the right choice depends mainly on what you bake and on the oven you run.

The silicone-coated fibreglass baking cloth

This is the most common solution in professional kitchens. The cloth combines a fibreglass weave with a food-grade silicone coating. At Maé Innovation, our cloths withstand temperatures from -40 °C to +280 °C in continuous contact, and they meet both FDA 21 CFR 177.1550 and European Regulation 10/2011. In other words, the same cloth travels from the blast freezer to the fan oven without any change of support.

Its main advantage remains non-stick performance without added fat, which removes the greasing step and one source of inconsistency. The cloth also washes and goes back into service, which moves it out of the consumables budget and into the equipment budget.

Already working with branded cloths ? Maé Innovation offers its own baking cloth, designed for industrial bakeries and high-output kitchens, with stable performance batch after batch, from the blast freezer to the fan oven. It comes in sizes that fit professional trays and therefore slots into your current organisation.

The PTFE sheet

The PTFE sheet, better known as a Teflon sheet, covers an even wider range: from -55 °C to +254 °C in continuous contact, under the same regulatory references, FDA 21 CFR 177.1550 and Regulation 10/2011. It cuts easily to tray dimensions and stays very thin, so it stacks without taking up space.

It does demand more care, however. A folded sheet keeps a permanent crease, a scratched surface loses its non-stick properties, and it must be replaced as soon as it tears. We deliberately give no service-life commitment on this product, precisely because that life depends entirely on conditions of use.

The mould, which removes the support altogether

The third route is to stop using a support at all. A silicone or silicone-coated fibreglass mould carries the dough, bakes it and releases it with no paper or cloth in between. This solution makes sense as soon as the product has a shape: tin bread, baguette, milk roll, tart base, entremets. In the bakery, this family of moulds often goes by a brand name, Flexipan, Pavoflex, Silikomart or de Buyer depending on the workshop. The manufacturing principle is comparable from one maker to the next, a fibreglass weave coated with food-grade silicone, but each manufacturer has its own characteristics.

Our Fibermaé moulds, made from perforated silicone-coated fibreglass, are rated for 2,000 cycles in professional conditions, subject to conditions of use. A mould therefore replaces both the baking support and the shaping step, which removes two line items at once.

Baking paper alternatives compared

Criterion Baking paper Fibreglass cloth PTFE sheet
Reusable No, single use Yes, washable Yes, washable
Temperature range Depends on the maker -40 °C to +280 °C continuous -55 °C to +254 °C continuous
Food contact Depends on the maker FDA 21 CFR 177.1550 and 10/2011 FDA 21 CFR 177.1550 and 10/2011
Behaviour in a fan oven Lifts, needs weighting Stable, stays flat Stable if never folded
Point to watch Waste on every batch Never fold or scrape Replace as soon as it tears
Accounting line Recurring consumable Depreciable equipment Depreciable equipment

Which alternative suits your production?

The right call depends on the shape of the product and on how it bakes. Here are the situations that come up most often.

Flat products baked on a tray

Biscuits, shortbread, macaron shells, tuiles and meringues all bake flat. Here the silicone-coated fibreglass cloth replaces baking paper directly, with no change to the process. It is the simplest switch, and the one that pays back fastest because these products run every day.

Moulded or shaped products

For a tin loaf, a baguette, a milk roll or a tart base, the question of a support barely arises. The mould handles both baking and shaping. Replacing baking paper here means changing method rather than changing consumable, and consistency improves as a result.

Frozen or deferred production

As soon as you work with blast freezing, the temperature range becomes the decisive criterion. A cloth rated from -40 °C to +280 °C follows the product from the freezer to the oven with no intermediate transfer. You therefore remove one handling step and one risk of breakage on fragile pieces. Our article on the 600 x 400 mm silicone baking mat looks at what this changes over a single morning.

Already using branded moulds? Maé makes its own

Many bakeries dropped paper long ago and now work with branded moulds, Flexipan, Pavoflex, Silikomart, de Buyer or others. For them, the question is no longer the disposable support. It is about renewing the mould fleet, the cavity format and consistent baking at high output.

Maé Innovation designs and manufactures its own moulds, in silicone and in silicone-coated fibreglass, in its workshop in the Touraine. The Silmaé range covers platinum silicone moulds, usable from -40 °C to +280 °C, for shaped pieces and entremets. The Fibermaé range covers perforated silicone-coated fibreglass moulds for breads and baguettes, where air circulation decides the crust.

The difference lies mainly in controlling the cavity. Because we design and produce our moulds ourselves, a format can be adapted to your trays and your oven rather than the other way round, and a repeat order concerns a reference we still manufacture. Finally, our moulds work on the professional trays and in the ovens you already have in place.

Maintenance: what really decides the payback

A poorly maintained cloth loses its non-stick surface and goes straight back to being a consumable. Maintenance therefore drives the return on investment directly. Our recommendations come down to a handful of habits.

Clean with a damp, non-abrasive cloth. Where a degreaser is needed, use it with hot water at 70 °C, then rinse with clean water and check regularly that the pH stays neutral. Never fold a cloth or a sheet, because a fold creates a permanent weak point, and never scrape the surface. Finally, always store flat. Our dedicated guide explains how to clean a silicone baking mat step by step.

Baking cloths and baking mats

Silicone-coated fibreglass cloths and PTFE sheets, approved for food contact under FDA 21 CFR 177.1550 and European Regulation 10/2011. Washable and reusable, available in several sizes compatible with professional trays.

Fibermaé range, the mould that removes the support

Baguette and bread moulds in perforated silicone-coated fibreglass, made in France. Open mesh for air circulation, rated for 2,000 cycles in professional conditions, subject to conditions of use.

See the baking cloths
See the Fibermaé range

Summary: what to use instead of baking paper

Your production Recommended solution Why
Biscuits, macarons, tuiles Silicone-coated fibreglass cloth Direct swap, no change to the process
Shaped breads and pastries Fibermaé mould The mould handles baking and shaping, with no support
Frozen then baked products Silicone-coated fibreglass cloth -40 °C to +280 °C, freezer to oven with no transfer
Very thin flat items PTFE sheet Minimal thickness, cuts to tray size
Blind baking tart cases Keep baking paper It moulds to the pastry and cuts to the exact diameter

FAQ: replacing baking paper

What can you use instead of baking paper day to day?▼
On flat products baked on a tray, the silicone-coated fibreglass cloth replaces paper with no change to the process. For shaped products, a mould removes the need for a support entirely. The PTFE sheet stays useful on very thin items, where its minimal thickness makes the difference.
Is a reusable baking cloth approved for food contact?▼
It has to be, and the supplier must be able to prove it. Our cloths meet the American standard FDA 21 CFR 177.1550 and European Regulation 10/2011. At audit, always ask for the corresponding documentation. A supplier who cannot produce it straight away is a warning sign.
Can a baking cloth go into the blast freezer?▼
Yes. Our silicone-coated fibreglass cloths withstand temperatures from -40 °C to +280 °C in continuous contact. The same support therefore follows the product from the blast freezer to the oven, which removes an intermediate handling step and limits breakage on fragile pieces.
How long does a baking cloth last before replacement?▼
Service life depends entirely on how the cloth is used and maintained, which is why we publish no cycle count for cloths and sheets. Two habits extend it considerably: never fold the support and never scrape the surface. A cloth that loses its non-stick surface or tears should be replaced.
Do you still need baking paper once you have cloths?▼
One use holds out: blind baking a tart case, where the paper moulds to the pastry, cuts to the exact diameter and holds the beans. For that specific job it remains the simplest option. Across the rest of the production, reusable supports replace it without difficulty.

Want to try before you change your whole kitchen?

Maé Innovation manufactures its baking cloths and silicone-coated fibreglass moulds in France. Our technical team will point you to the format that fits your trays, your oven and your production.

For more on choosing your suppliers and your tooling, read our guide to silicone baking moulds and professional bakery equipment.

Shopping cart0
There are no products in the cart!
Total Tax Excl.:
0,00 €
Only 210 € to benefit from free delivery
Continue shopping